Why you need to call a plumber
Faucets are a big family. Compression, cartridge, ball and ceramic disc designs each wear out differently, and a repair kit that fits one will not fit another. Guessing at parts is how people end up with three trips to the hardware store and a faucet that still drips.
What goes on behind the fixture matters as much as the faucet. Old shutoff valves that will not close, supply lines that are crusty, and corroded connections can turn a simple swap into a leak under the sink. A pro checks all of that while the cabinet is open.
Hard water, older homes and mixed pipe materials all show up in western Washington houses. They affect which parts hold up. We pick fixtures and connections that suit your plumbing, instead of forcing a mismatch.
The Pyper way
How Pyper fixes it
Identify the fixture and the failure
We start by working out what you have and what failed: a worn cartridge, a bad seat, a cracked body, mineral buildup in the aerator, or a problem upstream like a failing valve. We check water flow and pressure so we are not blaming the faucet for a supply issue.
Repair or replace, whichever is smarter
If the faucet is sound, a new cartridge or seals often does it. If it is badly corroded or parts are discontinued, replacement is the honest answer. For installs, we help you choose a fixture that fits your sink or tub opening and your plumbing.
Replace what is behind it
New faucet, old supply lines, is a common recipe for a future leak. Depending on the situation, we replace supply lines and shutoff valves at the same time so you are not back in a year. We connect everything with proper fittings and no overtightening.
Test and show you
We run hot and cold, check for drips at every joint, test the shutoff valves, and make sure the drain operates. Then we show you where the shutoffs are and how to clean an aerator, so small upkeep stays easy.
Easy wins and where to call for help
Cleaning an aerator by soaking it in vinegar, tightening a loose handle, and replacing a simple supply line are all within reach. Turn the water off first, and make sure it actually stops. Where DIY goes sideways: shutoff valves that will not close, handles that will not budge, corroded fittings that twist and break, and anything inside a wall such as tub and shower valves. Forcing old hardware can crack a pipe or start a leak you cannot stop. That is the moment to call someone with the right tools and a shutoff plan.
Fixed right the first time
Most faucet repeat repairs happen because only the visible part was changed. A new faucet on corroded valves or a worn supply line still leaks. We repair or replace the whole connection path, match the parts to your fixture, and test every joint under pressure, so the drip you paid to fix stays fixed.
Questions we hear
Is it worth fixing an old faucet?
Often yes, if the body is in good shape and a cartridge or seal is the issue. If it is corroded, loose or parts are no longer made, a new faucet is the better call.
Why is my faucet pressure low?
The aerator may be clogged with mineral buildup, a supply valve may be partly closed, or the supply line may be kinked or corroded. We check each before replacing anything.
Can you install a faucet I bought?
Yes. Bring it along with the box and parts, and we will check that it fits your sink and plumbing before we start.
What if my shutoff valve is stuck?
Do not force it. Old valves can break. We can replace the valve so you have a working shutoff when you need one.
Guides
Helpful guides
Faucets and fixtures
Dripping Faucet: Repair or Replace? A Homeowner Guide
Dripping faucet? Learn what causes drips in each faucet type, how to shut off water safely, and when repair or replacement makes more sense.
Zach Datskiy · 5 min read
Read the guideFaucets and fixtures
Faucet Low Flow: Clean the Aerator, Check the Cartridge
Weak flow at one faucet? Learn how to clean an aerator safely, when the cartridge or a valve is the cause, and when it points to supply or pressure.
Zach Datskiy · 4 min read
Read the guideRelated services
Leak detection and repair
Hidden leaks waste water and rot your home. We find the exact spot, fix it, and test it.
Learn moreToilet repair and install
Running, rocking, leaking or clogged toilets fixed or replaced, sealed right and tested.
Learn moreGarbage disposals
Jammed, humming or leaking disposal? We fix it or replace it safely and test it.
Learn moreWhere we do this work
Pyper handles faucets and fixtures across four counties. Choose your city.
No match. Call us and we will confirm your address.
