Why you need to call a plumber
The hard part of a leak is rarely the repair. It is knowing where the water is actually coming from. Water follows pipes, framing and drywall, so the stain on your ceiling can sit several feet from the source. Guess wrong and you open the wrong wall, patch the wrong joint, and the leak keeps going.
A slow leak is also sneaky. It can soak insulation, feed mold, soften subfloors and warp cabinets long before a puddle shows up. Western Washington is damp already, so a hidden leak in a crawl space or wall cavity may stay wet for a long time.
A pro brings tools and a method. We sort out which pipe is leaking, what caused it, and whether it is a one-spot problem or a sign the whole line is tired. Then you can make a smart decision instead of a panicked one.
The Pyper way
How Pyper fixes it
Narrowing down where it is
We start by listening to you: when you noticed it, what changed, where it is wet. Then we confirm there is a leak with a meter check and, depending on the situation, a pressure test to see whether the lines hold. That tells us if the leak is on the supply side, in a drain, or at a fixture, before we cut anything.
Pinpointing the exact spot
Depending on the situation, we use moisture readings, listening equipment, thermal imaging, or a camera to trace the water back to the source. The goal is the smallest possible opening. We would rather open one small section of wall than a whole room.
Repairing the cause, not the drip
Once the leak is exposed we look at why it failed. A pinhole in old copper, a cracked fitting, a worn supply line and a bad solder joint all call for different repairs. We use the right parts and replace the damaged section rather than wrapping a bandage around it.
Testing and explaining
We pressure-test the repaired line and watch it, then recheck the meter. We show you what we found, explain what dried-out materials you should keep an eye on, and tell you plainly if nearby pipe looks worn. You will know what happened and what to watch for.
What you can check yourself, and where to stop
You can do the first round of detective work. Check under sinks, around the toilet base and near the water heater. Put dye in your toilet tank and wait to see if color reaches the bowl, which is a common sign of a leaking flapper. Try a meter check with everything off. All of that is safe and useful. Stop when the leak is inside a wall, under a slab, in the crawl space, or you are unsure which line to shut off. Cutting into walls on a guess often creates a second repair. A pro can find it with less damage.
Fixed right the first time
A leak usually has a cause: corrosion, a failed joint, high pressure, or a pipe that has simply aged out. A quick patch hides the symptom while the cause keeps working, and the next weak spot is often just a few feet away. By confirming the exact source, checking the pipe around it, using proper parts and pressure-testing afterward, we aim to fix what is really wrong, so you are not paying for the same leak twice.
Questions we hear
How do I know if I have a hidden leak?
Turn off everything that uses water, then check your meter or its leak indicator. If it moves over about half an hour, water is going somewhere. Rising bills, musty smells, and stains are other clues.
Will you have to tear up my walls?
Not if we can avoid it. We use detection methods to narrow the location first, so any opening is small and targeted. Sometimes access is unavoidable, and we will tell you before we cut.
Can a leak be under my concrete slab?
Yes, it is possible. Depending on the situation, we may isolate the line, test it, and discuss options like repairing the spot or rerouting the pipe. We will lay out the choices before any work starts.
Is a small drip worth fixing right away?
Yes. Small leaks tend to grow, and the damage around them costs more than the repair. A drip under a sink is a quick fix. The same drip left for months can ruin a cabinet.
Guides
Helpful guides
Leak detection and repair
How to Find a Hidden Water Leak: The Meter Test
Find a hidden water leak with the water meter test and a toilet dye test. Learn common hiding spots, what a high bill means, and when to call a plumber.
Mark Datskiy · 5 min read
Read the guideLeak detection and repair
Low Water Pressure: Causes, Tests and Fixes
Low water pressure at home? Learn the common causes, how to test pressure with a gauge, healthy ranges, and which fixes are safe to try yourself.
Mark Datskiy · 5 min read
Read the guideLocal story
Whidbey and Camano Plumbing: Water, Wells and Leaks
How island water supply works on Whidbey and Camano, and what it means for leaks, pressure and shutoffs inside the home. Wells and septic need specialists.
Zach Datskiy · 5 min read
Read the guideRelated services
Repiping
Old, leaky or corroded pipes replaced with durable new lines, planned to cause minimal mess.
Learn more24/7 emergency plumbing
Burst pipes, sewer backups, floods and more. Call any hour.
Learn moreFaucets and fixtures
Dripping faucets, weak showers and stuck valves repaired or replaced with the right parts.
Learn moreWhere we do this work
Pyper handles leak detection and repair across four counties. Choose your city.
No match. Call us and we will confirm your address.
