Why you need to call a plumber
A disposal sits where plumbing, electricity and spinning metal meet. That mix is why basic safety matters here. Never put a hand into a disposal, even when it looks off. Power it off at the switch and unplug it or shut off its breaker first.
A leak is the most common reason to call. Water can come from the sink flange, the unit body, the dishwasher hose connection, or the drain pipe. Each is a different fix, and finding the right one takes patience with a dry paper towel and a flashlight.
Repeated jams and slow draining can also be a sign that the problem is not the disposal at all but the drain line past it. A pro checks both so you do not keep resetting a unit that is working fine.
The Pyper way
How Pyper fixes it
Find the cause
We turn off the power, then look at the unit. Is it jammed, overloaded, leaking, or clogged downstream? We check the flange seal, the drain connections, the dishwasher inlet and the trap. We separate a motor problem from a plumbing problem before replacing anything.
Clear or repair
For a jam, we free the blades with the proper hex wrench or tool at the bottom of the unit and remove whatever caused it. For a leak, we reseal the flange or tighten and replace the gaskets and fittings. If the housing itself is cracked or the motor is failing, we talk replacement.
Install a new unit properly
A new disposal needs a solid mount, a sealed sink flange, a properly connected drain and dishwasher inlet, and a knockout plug removed if a dishwasher is hooked up. If the electrical supply or wiring is the problem, that is a job for an electrician, since Pyper does not do electrical work.
Test and explain
We run water through the unit and watch every connection for drips. We check the grind, the drain flow and the reset button. Then we tell you what to avoid, like grease, fibrous scraps and bones, and give you a simple routine for keeping it fresh.
Safe things to try, and clear limits
With the power off, you can use the hex socket at the bottom of many units to turn the blades back and forth, then press the reset button. You can also pull a stuck item out with tongs, never your hand. That is fine for a simple jam. Stop if the unit leaks, trips repeatedly, smells burnt, or if you are unsure the power is off. Anything involving wiring is for an electrician. Mounting and plumbing a replacement is where leaks and loose connections often creep in.
Fixed right the first time
A disposal that keeps jamming or leaking usually has a cause outside the motor: a bad flange seal, a clogged drain line, a mismatched trap, or a habit of feeding it the wrong things. By checking the whole sink drain, using the right gaskets and mounting parts, and testing under running water, we aim to fix the cause, not just reset the problem for a week.
Questions we hear
My disposal hums but will not spin. What now?
It is likely jammed. Power it off first, then try turning the blades with the hex socket at the bottom, remove what is stuck with tongs, and press reset. If it keeps happening, call us.
Why is my disposal leaking?
It could be the sink flange seal, the unit body, the dishwasher hose or the drain connection. Dry everything and watch to see where it starts. We can pinpoint it quickly.
Can you replace my disposal?
Yes. We mount, seal and connect the new unit and test it. If wiring needs work, an electrician should handle that part.
What should not go down a disposal?
Grease, coffee grounds in large amounts, stringy or fibrous scraps, bones, and pasta or rice that swell can all cause trouble. Run cold water while it works.
Guides
Helpful guides
Garbage disposals
Garbage Disposal Jammed, Humming or Leaking: What to Do
Disposal humming or stuck? Follow safe steps: power off, use the hex key, press reset. Learn what causes leaks and when to replace the unit.
Zach Datskiy · 5 min read
Read the guideGarbage disposals
Garbage Disposal Smells: Causes and Safe Fixes
Garbage disposal smells? Learn what causes odors, how to clean it safely, what never to grind, and when the smell is sewer gas instead.
Zach Datskiy · 5 min read
Read the guideDrain cleaning
Kitchen Sink Clogged or Backing Up: Causes and Fixes
Kitchen sink clogged or backing up? See common causes, safe DIY steps with a plunger and trap, what to avoid, and when it points to the main line.
Zach Datskiy · 6 min read
Read the guideRelated services
Drain cleaning
Slow or clogged drains? We clear the blockage and check why it formed so it stays clear.
Learn moreFaucets and fixtures
Dripping faucets, weak showers and stuck valves repaired or replaced with the right parts.
Learn moreLeak detection and repair
Hidden leaks waste water and rot your home. We find the exact spot, fix it, and test it.
Learn moreWhere we do this work
Pyper handles garbage disposals across four counties. Choose your city.
No match. Call us and we will confirm your address.
